R
Rob
A7N8X-Dlx Ver 2.0
1007 BIOS
WinXP Home
nVidia 3.13 UD
Logitech Z-640 Speakers
I've been running this MoBo for a month now and comments here convinced
me to remove my SB Live 5.1 card and try the onboard sound. I removed
all the SB drivers/software and the card. After reboot I then
initialized the onboard sound in BIOS and installed the nVidia Drivers &
Utilities. I set things up for 6-speaker Analog output, according to
the manual. Ran the speaker wizard and then tested the set using the
Test Tone. The center speaker had a very muffled sound no matter what
setting I chose but the Sub seemed OK. If I re-run the wizard and
change the Center/Sub to operate using the Mic-In Jack and move the
cable there, things work perfectly. Any ideas, or do i probably have a
bad solder job!
TIA.
Rob
1007 BIOS
WinXP Home
nVidia 3.13 UD
Logitech Z-640 Speakers
I've been running this MoBo for a month now and comments here convinced
me to remove my SB Live 5.1 card and try the onboard sound. I removed
all the SB drivers/software and the card. After reboot I then
initialized the onboard sound in BIOS and installed the nVidia Drivers &
Utilities. I set things up for 6-speaker Analog output, according to
the manual. Ran the speaker wizard and then tested the set using the
Test Tone. The center speaker had a very muffled sound no matter what
setting I chose but the Sub seemed OK. If I re-run the wizard and
change the Center/Sub to operate using the Mic-In Jack and move the
cable there, things work perfectly. Any ideas, or do i probably have a
bad solder job!
TIA.
Rob