a7n8x-del sata raid

  • Thread starter Thread starter Anonymous via the Cypherpunks Tonga Remailer
  • Start date Start date
A

Anonymous via the Cypherpunks Tonga Remailer

I want to use a single SATA disc with this board. I don't know anything about raids. Can I do this or does it have to be 2 drives in some raid array?
 
Anonymous said:
I want to use a single SATA disc with this board. I don't know anything about raids. Can I do this or does it have to be 2 drives in some raid array?
Click to expand...
A single drive works fine. Make sure you have the SATA Jumper enabled.
When it's all hooked up you should see the drive displayed in the
SATAraid portion of the boot sequence but you need take no further
action at that point. Make sure you have the controller drivers on a
floppy if your doing a fresh install of WinXP/2K as you'll need to hit
F6 and insert the floppy when prompted, to merge the drivers with the OS
install. Change he boot device to SCSI after installing the OS. If just
using as an additional drive, hook it up and partition and format it!

Rob
 
No, you don't have to have two SATA HD's....I have a single 80Gb SATA HD and
it works fine.


Paul
Anonymous via the Cypherpunks Tonga Remailer said:
I want to use a single SATA disc with this board. I don't know anything
Click to expand...
about raids. Can I do this or does it have to be 2 drives in some raid
array?
 
Back
Top