A7N8X 2.0 Deluxe Performance

  • Thread starter Thread starter Mike Atkinson
  • Start date Start date
M

Mike Atkinson

Sorry if this has been covered before, just found this newsgroup.

OK, spec.
A7N8X 2.0 Delux, running Pheonix BIOS Rev 1007
AMD 2600+ Athlon XP and 512 meg of DDR RAM.

Damn thing runs like a dog, and I don't mean grayhound. Very slow boot,
graphics slow (GeForce FX 5200 from Gainward), lots of hard disc activity
and I can't figure out why. Possibly BIOS setup.

Anybody got any ideas, or a "perfect" BIOS setup I can look at?

Many thanks,
Mike
 
did you use the jumper to disable SATA if you are not using it?...and we
need more specs...I am running
A7N8X-Deluxe rev 2.0..Uber bios 1007
AMD Barton 2500 @200x11
3-256 PC3200EL OCZ ram
ATI 9600XT
etc........
 
Hi,

You did not say whether you CPU is a Barton (333Mhz FSB) or a Thoroughbred
(266 FSB) but the BIOS may need to be set correctly to get the chip to run
at the full speed. set the FSB in the bios to either 133 for the
Thoroughbred or 166 for the Barton. If it is set to 100Mhz the chip will be
running slower than it should.
 
Back
Top