A patch is preventing the system from starting. - Which one?

  • Thread starter Thread starter Thalador
  • Start date Start date
T

Thalador

So I am a good techie and patch my system regularly. I am running Vista x64
Ultimate SP1. Up until a few weeks ago no problem. I log on and windows
update says I have xx patches to install. I install and reboot and the
problems began. When I would try and open MMC, Explorer, IE it wouldn't open
or I would get a "Cannot create blank document" error. Tried to go into safe
mode, blue screen..Things kept getting worse until I got Stop errors..

So I get my Vista DVD and do a repair. It goes through and towards the end
the log shows

Root cause found:
---------------------------
A patch is preventing the system from starting.

Repair action: System Restore
Result: Completed successfully. Error code = 0x0
Time taken = 144676 ms

My OS is back to working.. BUT, Windows update now shows I have 14 patches
to install. You can believe me I am not installing anything now. So, how do I
tell which patch prevented my system from starting?
 
You are probably using a hardware driver that can't handle one of the
patches. About your only choices are stop using the driver or the patch. You
can easily select one patch at a time to test, using system restore to go
back on failure. "Safe Mode With Command Prompt" will accept the command:

%systemroot%\system32\restore\rstrui.exe

You can also try to detect the problem using the error reporting available
in the Windows Update app. When you 'view update history' you get a link to
troubleshooting help.

If an error has occurred, it will be displayed with an error code that you
can use to search online for help.



--
Use the "Ratings" feature. It helps the new users.
Please use the Communities guidelines when posting.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm
Mark L. Ferguson MS-MVP
https://mvp.support.microsoft.com/profile/Mark.Ferguson
 
So even though the OS knew that a patch was preventing the system from
starting, it can't tell me which? This seems absurd to me. You advice tells
me to redo each patch, reboot and hope it doesnt blow up. While it may be an
answer, I was hoping I can determine which one is the problem
 
Thalador,

Some times you have to do outrageous things in order to find out what is
going wrong. Even if this does mean having to install or remove and then
restart over and over. The only way you're going to find out anything
specific is if the Windows failure leaves you an error file that you can
catch some information from. You said that it can't tell you what is
failing, so this is probably a lost cause; forcing you to return to the only
thing that will work, and that is trial and error. Unfortunately, computer
problems aren't always click and fix, as I'm sure you know. If not, you will
learn soon enough, lol.

Sorry that you are having this problem, bud. The only thing that I can tell
you to help you any farther is to check the updates that you are installing
before you install them. Make sure they are compatible with your system and
devices before you install it. I've had a couple of updates that had my
computer crippled for months, but are no longer an issue thanks to
reformatting and watching what I installed. The only way you will be able to
tell what patch (aka update) is effecting your system, you should do what
Mike advised, and try installing them one by one. Maybe two by two, so you
can move a bit faster, as I know there can be a lot.

--

Colton, PHP/VB6/HTML/CSS/Javscript/IIS/Apache
OS: Vista Home Premium x86 SP1

- http://explosion.debug-inc.com
- (e-mail address removed)
 
I have been getting the same error so the original poster is not alone.

I am using Vista Premium 64bit with a Core i7 and 9 gigs of ram. I

cannot update anything because it gets rolled back. I cannot believe

that with 5+ years of programming creating Vista; debugging, unit

testing, QA'ing that Microsoft did and they cannot match an error to a

patch. I have only had this thing since Xmas so it can only be one of

about 20 things.

You say I might have some hardware that cannot handle the patch? Well

I've looked through every device driver and see no problem except the

6to4 ipv6 fiasco that thousands of people have. I've disabled ipv6.

This is unacceptable and the reason many people are jumping ship for

Macs because most of the time, they just work, period. I have a

compatibility problem with a Microsoft Laser Mouse 5000 forcing me to

NOT even be able to use Aero.

There is no way on Earth I'm going to undo the last 20 times I've tried

to install updates to find the "patch" that doesn't work. Why doesn't

Microsoft have a real customer support center? At this point my pc boots

but rebooting is a crap shoot. Vista is taking valuable time away from

me and my work, and frankly I'm close to just wiping this very fast box

clean and installing XP Pro. I hope the people who got laid off at MS

are the lame programmers who screwed the pooch with Vista. Windows 7 is

obviously what Vista was supposed to be. It better be a free upgrade or

I'm jumping ship.

You need Linux. These problems do not exist
 
I have found myself in the same position, unfortunately I don't have a system restore point on my computer. Now as a result can't get windows running again any thoughts on how I can get around this?



Thalado wrote:

A patch is preventing the system from starting. - Which one?
13-Dec-08

So I am a good techie and patch my system regularly. I am running Vista x64
Ultimate SP1. Up until a few weeks ago no problem. I log on and windows
update says I have xx patches to install. I install and reboot and the
problems began. When I would try and open MMC, Explorer, IE it wouldn't open
or I would get a "Cannot create blank document" error. Tried to go into safe
mode, blue screen..Things kept getting worse until I got Stop errors.

So I get my Vista DVD and do a repair. It goes through and towards the end
the log show

Root cause found:
--------------------------
A patch is preventing the system from starting

Repair action: System Restor
Result: Completed successfully. Error code = 0x
Time taken = 144676 m

My OS is back to working.. BUT, Windows update now shows I have 14 patches
to install. You can believe me I am not installing anything now. So, how do I
tell which patch prevented my system from starting?

Previous Posts In This Thread:

A patch is preventing the system from starting. - Which one?
So I am a good techie and patch my system regularly. I am running Vista x64
Ultimate SP1. Up until a few weeks ago no problem. I log on and windows
update says I have xx patches to install. I install and reboot and the
problems began. When I would try and open MMC, Explorer, IE it wouldn't open
or I would get a "Cannot create blank document" error. Tried to go into safe
mode, blue screen..Things kept getting worse until I got Stop errors.

So I get my Vista DVD and do a repair. It goes through and towards the end
the log show

Root cause found:
--------------------------
A patch is preventing the system from starting

Repair action: System Restor
Result: Completed successfully. Error code = 0x
Time taken = 144676 m

My OS is back to working.. BUT, Windows update now shows I have 14 patches
to install. You can believe me I am not installing anything now. So, how do I
tell which patch prevented my system from starting?

You are probably using a hardware driver that can't handle one of the patches.
You are probably using a hardware driver that can't handle one of the
patches. About your only choices are stop using the driver or the patch. You
can easily select one patch at a time to test, using system restore to go
back on failure. "Safe Mode With Command Prompt" will accept the command

%systemroot%\system32\restore\rstrui.ex

You can also try to detect the problem using the error reporting available
in the Windows Update app. When you 'view update history' you get a link to
troubleshooting help

If an error has occurred, it will be displayed with an error code that you
can use to search online for help


--
Use the "Ratings" feature. It helps the new users
Please use the Communities guidelines when posting.
http://www.microsoft.com/wn3/locales/help/help_en-us.ht
Mark L. Ferguson MS-MV
https://mvp.support.microsoft.com/profile/Mark.Ferguso


So even though the OS knew that a patch was preventing the system from
So even though the OS knew that a patch was preventing the system from
starting, it can't tell me which? This seems absurd to me. You advice tells
me to redo each patch, reboot and hope it doesnt blow up. While it may be an
answer, I was hoping I can determine which one is the proble

:

Thalador, Some times you have to do outrageous things in order to find out
Thalador

Some times you have to do outrageous things in order to find out what is
going wrong. Even if this does mean having to install or remove and then
restart over and over. The only way you're going to find out anything
specific is if the Windows failure leaves you an error file that you can
catch some information from. You said that it can't tell you what is
failing, so this is probably a lost cause; forcing you to return to the only
thing that will work, and that is trial and error. Unfortunately, computer
problems aren't always click and fix, as I'm sure you know. If not, you will
learn soon enough, lol.

Sorry that you are having this problem, bud. The only thing that I can tell
you to help you any farther is to check the updates that you are installing
before you install them. Make sure they are compatible with your system and
devices before you install it. I've had a couple of updates that had my
computer crippled for months, but are no longer an issue thanks to
reformatting and watching what I installed. The only way you will be able to
tell what patch (aka update) is effecting your system, you should do what
Mike advised, and try installing them one by one. Maybe two by two, so you
can move a bit faster, as I know there can be a lot.

--

Colton, PHP/VB6/HTML/CSS/Javscript/IIS/Apache
OS: Vista Home Premium x86 SP1

- http://explosion.debug-inc.com
- (e-mail address removed)



I have been getting the same error so the original poster is not alone.
I have been getting the same error so the original poster is not alone.
I am using Vista Premium 64bit with a Core i7 and 9 gigs of ram. I
cannot update anything because it gets rolled back. I cannot believe
that with 5+ years of programming creating Vista; debugging, unit
testing, QA'ing that Microsoft did and they cannot match an error to a
patch. I have only had this thing since Xmas so it can only be one of
about 20 things.

You say I might have some hardware that cannot handle the patch? Well
I've looked through every device driver and see no problem except the
6to4 ipv6 fiasco that thousands of people have. I've disabled ipv6.

This is unacceptable and the reason many people are jumping ship for
Macs because most of the time, they just work, period. I have a
compatibility problem with a Microsoft Laser Mouse 5000 forcing me to
NOT even be able to use Aero.

There is no way on Earth I'm going to undo the last 20 times I've tried
to install updates to find the "patch" that doesn't work. Why doesn't
Microsoft have a real customer support center? At this point my pc boots
but rebooting is a crap shoot. Vista is taking valuable time away from
me and my work, and frankly I'm close to just wiping this very fast box
clean and installing XP Pro. I hope the people who got laid off at MS
are the lame programmers who screwed the pooch with Vista. Windows 7 is
obviously what Vista was supposed to be. It better be a free upgrade or
I'm jumping ship.


--
Frustrated User
------------------------------------------------------------------------
Frustrated User's Profile: http://forums.techarena.in/members/frustrated-user.htm
View this thread: http://forums.techarena.in/vista-help/1087073.htm

http://forums.techarena.in


Submitted via EggHeadCafe - Software Developer Portal of Choice
..NET string.Split("::") Bug With Duplicate Delimiters
http://www.eggheadcafe.com/tutorial...47d4-a7a7-604e48747219/net-stringsplit-b.aspx
 
Same position about responding to a year-old thread? Start a new thread with
a description of your problem and system configuration and someone can try
to help you.
 
I have found myself in the same position,

Please do NOT change the subject line.

Please note:
This is NOT a chat room and although you think you are posting to a forum
run by Techarena - you are actually posting to a global Usenet Newsgroup.
Techarena forums leach off the Microsoft News Servers in order to make them
seem far busier than they really are.

You will get a far better experience if you use a newsreader and subscribe
to these groups directly, rather than through TechArena.
Setting up Outlook Express/Windows Mail to access Microsoft newsgroups
http://www.michaelstevenstech.com/outlookexpressnewreader.htm

Accessing the MS newsgroups in Outlook Express/Windows Mail Newsreader
http://www.microsoft.com/windowsxp/expertzone/newsgroupsetup.mspx

If you must stay with TechArena then please follow Usenet custom by quoting
the post you are replying to, and replying to the thread.

Thank you.

http://members.shaw.ca/dts-l/goodpost.htm
 
Back
Top