9800pro fan

  • Thread starter Thread starter Jeff McNulty
  • Start date Start date
J

Jeff McNulty

Stock heatsink fan is dying noisy and slow. Already took out and cleaned
with air and contact cleaner. Just bought this item from Antec called a
Vcooler. It takes up the PCI slot next to card and blows outside air onto
card. I was thinking of removing the stock fan completely and just letting
the new fan blow direclty on the heasink and mem chips. The stock fan on
that card is pretty weak to begin with. Any thoughts?
 
Mine died also, went to local computer store and bought an after market
specific to ATI took the card with me and they installed it
works real well cost $16
 
The stock fan at this point is probably just impeding airflow more than
anything else. Remove the fan and reattach the heat sink with new thermal
paste. The Antec Vcooler will do the job.
 
Stock heatsink fan is dying noisy and slow. Already took out and cleaned
with air and contact cleaner. Just bought this item from Antec called a
Vcooler. It takes up the PCI slot next to card and blows outside air onto
card. I was thinking of removing the stock fan completely and just letting
the new fan blow direclty on the heasink and mem chips. The stock fan on
that card is pretty weak to begin with. Any thoughts?
Click to expand...

ebay the antec and get an arctic cooler or a zalman. if your ramchips
don't have heatsinks, get some!


-
steve <AT> steveevans <DOT> org
-
 
Back
Top