A
A Thiel
How high can you get the this card to clock up to on average ?
P.S. ATI 9700 Pro
Thanx....
P.S. ATI 9700 Pro
Thanx....
U
Usenetter
Got my Gigabyte 9700 Pro up to 372/352 - no 3DMk03 artefacts, on : -
Epox 8RDA3+ (227 FSB - 2.0v, 60mm Alu NB H/S + Papst 8412 19CFM)
XP1800 DLT3C (10.0 - 2270 MHz = XP3200+ stable - 1.75v, Thermalright SK-7 +
Papst 8412)
2 x OCZ 256MB PC3700 (454 - 7-3-3 / 2.0 dual - 2.9v)
Gigabyte Radeon 9700 Pro (373/353 - 1.5v, 60mm Cu H/S (yet to fit) + Papst
8412)
Air - 48/62C
3DMk03 - 5,735
3DMk01 - 17,378
Epox 8RDA3+ (227 FSB - 2.0v, 60mm Alu NB H/S + Papst 8412 19CFM)
XP1800 DLT3C (10.0 - 2270 MHz = XP3200+ stable - 1.75v, Thermalright SK-7 +
Papst 8412)
2 x OCZ 256MB PC3700 (454 - 7-3-3 / 2.0 dual - 2.9v)
Gigabyte Radeon 9700 Pro (373/353 - 1.5v, 60mm Cu H/S (yet to fit) + Papst
8412)
Air - 48/62C
3DMk03 - 5,735
3DMk01 - 17,378
A
Anders E.D
I have a Built By ATI Radeon 9700 Pro. The max overclock without
artifact/freezes are 340/340 (680)
artifact/freezes are 340/340 (680)
A
A Thiel
Do any of you have the AGP bus higher than 66 mhz ?
R
Roger Squires
387/353 max with no artifacts. But that is with a 1U cpu heatsink mounted,
and a voltage mod.
rms
and a voltage mod.
rms
E
Eric F
I get 392/338 on my FIC 9700 non-pro w/no artifacts.
I think mine has the hynix 3.6ns memory.
A
Anders E.D
No. I have it locked at 66Mhz (Abit NF7-S v2.0 motherboard)
C
Chip
A Thiel said:
I couldn't run it any higher than 66 in my A7V8X. It would crash out even
at 67!