9600 2 Displays, 2 Resolutions - NOT

  • Thread starter Thread starter Randall
  • Start date Start date
R

Randall

I'm pumping one into the TV straight, with the VGA connector, and the
other into an LCD panel.

The TV is 800x600 (I know this only because that is what it looks
like) and the LCD is on but with blank video.

When I tap identify, the number 2 pops up on the LCD and the number 1
the TV, but when I go into the properties, it shows an S-Video
connection and a regular monitor, which I "think" is the TV, number 1.

Man, I'm confused, any help out there?
 
TV is 1024X768 here on AIW 9600XT
I usually run monitor at 1360X1024 but drop to
match tv so I get full screen on the tv otherwise
I only get part of it.

You are using the RCA for tv right? and VGA to LCD?
Or yours has s-video to tv?
 
TV is 1024X768 here on AIW 9600XT
I usually run monitor at 1360X1024 but drop to
match tv so I get full screen on the tv otherwise
I only get part of it.

You are using the RCA for tv right? and VGA to LCD?
Or yours has s-video to tv?
Click to expand...

I've got a VGA input to the TV, so the 2 connectors coming from the
9600 are - for all-intents-and-purposes going to 2 monitors.

I HAVE noticed that I seems to be spanning, if I drag the window/icon
far enough to the right, it'll end up on the LCD panel at the proper
resolution, BUT I want the same desktop and apps to be on both, just
different resolutions.
 
Back
Top