802.1X eap-tls authentication on vista

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My wifilan is 802.1x security enabled with certificate based authentication
with RADIUS server.I am using eap-tls .
This set up is working with windowsxp. But with vista it is not working.
I am able to install root and client certificate in vitsa.But it is not
working.
 
Anoop,

What errors are you getting, and where? There are two phases for EAP; one
is the EAP authentication and then the creation of the TLS channel. Without
the error, I can't know what the issue is.

Also, have you tried right clicking on the network icon in the system tray
and running Diagnose?
 
Hi Kim
Thanks for the reply.
Pls find the event log of the same.

System

- Provider

[ Name] Microsoft-Windows-Diagnostics-Networking
[ Guid] {36c23e18-0e66-11d9-bbeb-505054503030}

EventID 6100

Version 0

Level 4

Task 12

Opcode 0

Keywords 0x4000000000000002

- TimeCreated

[ SystemTime] 2007-03-30T04:06:33.430Z

EventRecordID 4063

- Correlation

[ ActivityID] {6DD3A053-1777-4A01-8803-D2872E756B4A}

- Execution

[ ProcessID] 2748
[ ThreadID] 1620

Channel System

Computer admin-PC

- Security

[ UserID] S-1-5-19


- EventData

HelperClassName L2Sec Helper Class
EventDescription For complete information about this session see the
Wireless Diagnostic Informational Event. Helper Class: Layer2 Security
Initialize Status: Success Result of diagnosis: Problem found Issue referred
to: EAP Helper Class Root cause: Windows cannot connect to "SifySecure"
Wireless authentication failed. Detailed root cause: EAP failed Workaround
for hypothesis: Contact the network administrator for "SifySecure"
Information for connection being diagnosed Interface GUID:
{200ea142-2fc2-44a1-be9c-469494e87bc1} Interface name: Intel(R) PRO/Wireless
3945ABG Network Connection Interface type: Native WiFi Profile: SifySecure
SSID: SifySecure SSID length: 10 Connection mode: Infra Security enabled: Yes
Connection ID: 5 Security settings provided by hardware manufacturer (IHV):
No Profile matches network requirements: Yes Pre-Association and association
status: Success Security and Authentication: Configured security type:
Wireless Protected Access with 802.1X (WPA) Configured Encryption type: TKIP
Security connect status: Fail 0x00050005 Number of security packets received:
5 Number of security packets sent: 5 802.1X protocol: Yes Authentication
Identity: Invalid IAS Server engaged: Yes EAP Method supported by IAS Server:
Unknown EAP type: 13 EAP Error: 0x80090326 Number of 802.1X restarts: 0
Number of 802.1X failures: 2 802.1X status: Fail 0x00050005 Key exchange
initiated: No Unicast keys received: No Multicast keys received: No
EventVerbosity 0

We are installing root.der and client.p12 format of SSL certificates
Anoop
 
Back
Top