3D Prophet 4000XT PCI

  • Thread starter Thread starter Walmsley's
  • Start date Start date
W

Walmsley's

Hi

I'm trying to get a 3D Prophet 4000XT PCI card to work on my friends PC.

_______________________________________________________________
Time of this report: 12/30/2003, 13:52:39
Machine name: BILLY
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack
1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 2400
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05
Processor: Intel(R) Pentium(R) 4 CPU 3.06GHz (2 CPUs)
Memory: 510MB RAM
Page File: 179MB used, 1069MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: None
DxDiag Version: 5.03.0001.0902 32bit Unicode
It goes in fine, and 2D is perfect."
__________________________________________________________________


When I do a test in DXDiag (V.9b) it fails.

I get the following messages:
__________________________________________________________________
Direct3D 7 test results: Failure at step 8 (Creating 3D Device): HRESULT =
0x80004005 (Generic failure) Direct3D 8 test results: Failure at step 8
(Creating 3D Device): HRESULT = 0x8876086c (error code) Direct3D 9 test
results: Failure at step 8 (Creating 3D Device): HRESULT = 0x8876086c (error
code)
Display Tab 2: No problems found. DirectDraw test results: Failure at
step 5 (User verification of rectangles): HRESULT = 0x00000000 (error code)
Direct3D 7 test results: Failure at step 32 (User verification of Direct3D
rendering): HRESULT = 0x00000000 (error code) Direct3D 8 test results:
Failure at step 32 (User verification of Direct3D rendering): HRESULT =
0x00000000 (error code


DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 8 (Creating 3D Device): HRESULT =
0x80004005 (Generic failure)
D3D8 Test Result: Failure at step 8 (Creating 3D Device): HRESULT =
0x8876086c (error code)
D3D9 Test Result: Failure at step 8 (Creating 3D Device): HRESULT =
0x8876086c (error code)
_______________________________________________________________________


I have no idea where to start. I've uninstalled & reinstalled the card
several times, and it has the latest set of drivers (originals fail aswell)

Any ideas??

Much appreciated.

Nik.


*** Remove SPAMKILL from my Email Address to reply via Email ***
 
I had a similar issue with a Prophet Vid Card about a year ago. When I
installed it, there was no recognition at all. I called the suuport line for
the Computer Maker( Daewoo or something like that). They said that card was
not compliant with the intel chipset that was on the Mobo.

I hope that helps out a little
Renman
 
Back
Top