3com communication server

  • Thread starter Thread starter Grasso Antonio
  • Start date Start date
G

Grasso Antonio

Hi at all!
I have a 3com communicatio port server (cs/2600) as print server but I'm not
abel to install/configure it on Windows 2000 server.
Could anyone help me, please ?
 
Based on the info from the 3COM site, that looks like a pretty old device.
You might want to consider replacing it with a newer "print server",
particularly if the cs/2600 is not used for anything else. Simple "print
server" boxes are not very expensive.

The documentation available on the 3COM site didn't say very much about how
to send print to it. How is the cs/2600 connected to the Windows 2000
computer (e.g. via a serial port or via the Ethernet port)?

If it's the Ethernet port, my guess would be that adding a Standard TCP/IP
port with the IP address of the cs/2600 might work.

Assuming you were able to print to it from some other computer before
installing Windows 2000, how was it configured on the computer it was
connected to then?
 
Back
Top