2000 server w/3 nic's

  • Thread starter Thread starter gene martinez
  • Start date Start date
G

gene martinez

I have a 2000 server with 3 nic's. They are connected to 3 different
networks. They are 192.168.1.1, 192.168.2.1, 192.168.254.254. I'd like
to set up the routing between them, but don't know how.. What do I
need to do. This is for a small home based test (learning (me))
network.

Thanks
 
Hi,

Just enable RRAS and configure it as a router.

To enable LAN and WAN routing

1. Open Routing and Remote Access
To open Routing and Remote Access, click Start, point to Programs, point to
Administrative Tools, and then click Routing and Remote Access.

2. Right-click the server name for which you want to enable routing, and
then click Properties.

3. On the General tab, select the Enable this server as a router check box,
and then do one of the following:
a.. For LAN routing, click Local routing only (LAN router).
b.. For LAN and WAN routing, click Local and remote routing (LAN and WAN
router).


Thanks,
Marc Reynolds
Microsoft Technical Support


This posting is provided "AS IS" with no warranties, and confers no rights.
 
Thanks

Marc Reynolds said:
Hi,

Just enable RRAS and configure it as a router.

To enable LAN and WAN routing

1. Open Routing and Remote Access
To open Routing and Remote Access, click Start, point to Programs, point to
Administrative Tools, and then click Routing and Remote Access.

2. Right-click the server name for which you want to enable routing, and
then click Properties.

3. On the General tab, select the Enable this server as a router check box,
and then do one of the following:
a.. For LAN routing, click Local routing only (LAN router).
b.. For LAN and WAN routing, click Local and remote routing (LAN and WAN
router).


Thanks,
Marc Reynolds
Microsoft Technical Support


This posting is provided "AS IS" with no warranties, and confers no rights.
Click to expand...
 
Back
Top