2000 install problem

  • Thread starter Thread starter robb
  • Start date Start date
R

robb

Help I have a IBM Pentium II that was running 98. I tried
to upgrade the software to 2000. When I run the setup CD I
get through to the checking perphials and saving section.
The system then reboots and continues this circle for
hours with no end. When I shut the system down and reboot
myself the software starts says 2000Pro is starting up and
then gives me a message " The type of the files is NTFS
Drive\device\hardisk0\partision1 is alreday NTFS". Then we
go through the circle again.

Is there any help on what to do?
 
Save yourself some time and trouble, given that you'll more than likely end
up with an unstable OS with all the remnants/ corruption left behind from
the upgrade. Best to blow it all away and go for the clean install.

To do a clean install, either boot the Windows 2000 CD-Rom or setup disks.
The set of four install disks can be created from your Win2k CD-rom; change
to the \bootdisk directory on the cd-rom and execute makeboot.exe (from dos)
or makebt32.exe (from 32 bit) and follow the prompts.

When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.

During Windows 2000 setup, at some point, will want to confirm the previous
operating system for the upgrade; at that point you'll simply insert the
qualified product install CD for it to verify. Then the install will
proceed.

Check the pc, mb or hardware manufacturer's web site for the latest bios and
or Windows 2000 drivers for your devices.


--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect


:
| Help I have a IBM Pentium II that was running 98. I tried
| to upgrade the software to 2000. When I run the setup CD I
| get through to the checking perphials and saving section.
| The system then reboots and continues this circle for
| hours with no end. When I shut the system down and reboot
| myself the software starts says 2000Pro is starting up and
| then gives me a message " The type of the files is NTFS
| Drive\device\hardisk0\partision1 is alreday NTFS". Then we
| go through the circle again.
|
| Is there any help on what to do?
|
 
Back
Top