1394 Hook up

  • Thread starter Thread starter Jason
  • Start date Start date
J

Jason

I have a laptop running Windows Vista. It has an ExpressCard/54.
I need to hook my camera up to the laptop.
The camera has a 4pin I link connection.

I need an expresscard/1394 port to make this happen. I haven't had luck
finding one. Any suggestions?
 
Ok. I figured out that I can connect a 4 pin to a 6 pin or 9 pin....
Now, what difference will I notice if I decide to go 6 or 9?
It's all data transfer speed right? The quality will remain the same?
Thanks again Colin
Jason
 
Sony's iLink is simply a firewire connector that does not provide power to
the device. That's the only difference between the 4 and 6 pin connectors.
6pin can provide power. Things like camcorders require separate power
supplies anyway so effectively there is no difference and data transfers at
up to 400 over either. 9pin is another matter. That provides for a
firewire transfer speed up to 800. 9pin and 6pin connectors are compatible
but 9pin and 4pin connectors are not.
 
Thanks Colin,
You are the man! I searched and searched for an ExpressCard/54 compatible
Firewire card that WILL work with Vista. I didn't have any luck finding a for
sure card. I read reviews on the products I could find, and others didn't
have any reviews... so I made the best educated guess I could.
I ordered, from NewEgg, a Startech EC13942 IEEE 1394 ExpressCard for $50.
It is for ExpressCard/34, which I assume will still work with a 54 (based on
some
reviews I read about other 34mm cards. (hope it works) Some of the people that
gave it a review mentioned that it works fine with Vista. It also comes with
a 4pin-6pin cord. I'm unsure of how long it is, but it should get me
started. It doesn't come with an optional power supply, but like you
mentioned, the camcorder powers itself.
 
Great! Good luck with it.

Jason said:
Thanks Colin,
You are the man! I searched and searched for an ExpressCard/54 compatible
Firewire card that WILL work with Vista. I didn't have any luck finding a
for
sure card. I read reviews on the products I could find, and others didn't
have any reviews... so I made the best educated guess I could.
I ordered, from NewEgg, a Startech EC13942 IEEE 1394 ExpressCard for $50.
It is for ExpressCard/34, which I assume will still work with a 54 (based
on
some
reviews I read about other 34mm cards. (hope it works) Some of the people
that
gave it a review mentioned that it works fine with Vista. It also comes
with
a 4pin-6pin cord. I'm unsure of how long it is, but it should get me
started. It doesn't come with an optional power supply, but like you
mentioned, the camcorder powers itself.
Click to expand...
 
Back
Top