1366x768 resolution

  • Thread starter Thread starter Jim Jawkins
  • Start date Start date
J

Jim Jawkins

I am trying to obtain the wide aspect display resolutions
on a Dell Optiplex GX110 model (standard hardware
configuration). The display that I am using is a 50"
Fujitsu XGA: P50XCA11UH. It only gives the standard
resolutions of 1024x768, etc. Any ideas please?
 
Jim Jawkins said:
I am trying to obtain the wide aspect display resolutions
on a Dell Optiplex GX110 model (standard hardware
configuration). The display that I am using is a 50"
Fujitsu XGA: P50XCA11UH. It only gives the standard
resolutions of 1024x768, etc. Any ideas please?

What kind of video controller does the Dell have? Is the
display connection analog or digital?

Custom/wide aspect resolutions can sometimes be added
to a video driver, depending on make and model of video
controller. E.g. by modifying the NV4_DISP.INF file for
Nvidia controllers prior to installing the driver.

But if the display is not returning EDID information that it
can accept wide aspect resolutions, it won't use these
custom resolutions. The only option in that case is to
modify the cable, and remove the DDC data line (pin 7 if
it's a digital cable). See:
http://www.mycableshop.com/techarticles/DVI.htm

Rick
 
Back
Top