0xC0000005 - Memory Access Violations

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

6-7 Days back i got Torjan in my PC and i successfully re-install the win XP
but all the software are running quite well except TALLY7.2, At the time when
i'm about to open [IT SHOWS AN ERROR MESSAGE - ( 0xc0000005 - MEMORY ACCESS
VIOLATION) ]. I had check my RAM 512 in other 5 PC, its working absolutly
fine. I dont know y this particular (Tally7.2) software is not working.
Please let me out from this issue, due to this i had already suffer
alot...Pls anybody help.

Moreover, I had tried to install tally7.2 on other Drives also (I mean to
say on C-drive, D-Drive, E-Drive, Other Partition Drives) but the same error
received.

regards
sandeep
 
Sandeep

I use Sage accounting software and until you mentioned Tally 7.2 I had
never heard of it. I see that Tally 7.2 is not the latest version.

Background on your error message:
http://msdn2.microsoft.com/en-us/library/ms796183.aspx

If you are satisfied that there is no problem with your RAM memory and
this is the only problem then it is most likely a damaged or corrupted
driver associated with Tally. The Tally web site does not offer much in
the way of support. Do you have a Maintenance Contract with Tally? If
yes raise the matter with them.

Do you have a current or nearly current data backup from before the
problem first arose? Does Tally software allow you to restore a data
back up? Do you have the original Tally software and is this failing to
install from the original CD? If this is so I suspect your only choice
is to go to Tally for help.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Thanks alot gerry for your reply

Tally7.2 is an Accounting Package & i'm using an original software but still
it wont work. Tally have a live support too. I had already written the mail
to them also, No reply received. I think tally persons itself not solve the
issue. i had a latest backup of my data but the thing is that. tally close
down immediately. i was not able to do anything on it.

Once again thank you for your reply. have a good day
regards
sandeep


Gerry said:
Sandeep

I use Sage accounting software and until you mentioned Tally 7.2 I had
never heard of it. I see that Tally 7.2 is not the latest version.

Background on your error message:
http://msdn2.microsoft.com/en-us/library/ms796183.aspx

If you are satisfied that there is no problem with your RAM memory and
this is the only problem then it is most likely a damaged or corrupted
driver associated with Tally. The Tally web site does not offer much in
the way of support. Do you have a Maintenance Contract with Tally? If
yes raise the matter with them.

Do you have a current or nearly current data backup from before the
problem first arose? Does Tally software allow you to restore a data
back up? Do you have the original Tally software and is this failing to
install from the original CD? If this is so I suspect your only choice
is to go to Tally for help.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja said:
6-7 Days back i got Torjan in my PC and i successfully re-install the
win XP but all the software are running quite well except TALLY7.2,
At the time when i'm about to open [IT SHOWS AN ERROR MESSAGE - (
0xc0000005 - MEMORY ACCESS VIOLATION) ]. I had check my RAM 512 in
other 5 PC, its working absolutly fine. I dont know y this particular
(Tally7.2) software is not working. Please let me out from this
issue, due to this i had already suffer alot...Pls anybody help.

Moreover, I had tried to install tally7.2 on other Drives also (I
mean to say on C-drive, D-Drive, E-Drive, Other Partition Drives) but
the same error received.

regards
sandeep
Click to expand...
Click to expand...
 
Are there any yellow question marks in Device Manager? Right click on
the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not checked.

Have you looked at the Warning and Error Reports in the System and
Application logs in Event Viewer?

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Part of the Description of the error will include a link, which you
should double click for further information. You can copy using copy
and paste. Often the link will, however, say there is no further
information.
http://go.microsoft.com/fw.link/events.asp
(Please note the hyperlink above is for illustration purposes only)

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja said:
Thanks alot gerry for your reply

Tally7.2 is an Accounting Package & i'm using an original software
but still it wont work. Tally have a live support too. I had already
written the mail to them also, No reply received. I think tally
persons itself not solve the issue. i had a latest backup of my data
but the thing is that. tally close down immediately. i was not able
to do anything on it.

Once again thank you for your reply. have a good day
regards
sandeep


Gerry said:
Sandeep

I use Sage accounting software and until you mentioned Tally 7.2 I
had never heard of it. I see that Tally 7.2 is not the latest
version.

Background on your error message:
http://msdn2.microsoft.com/en-us/library/ms796183.aspx

If you are satisfied that there is no problem with your RAM memory
and this is the only problem then it is most likely a damaged or
corrupted driver associated with Tally. The Tally web site does not
offer much in the way of support. Do you have a Maintenance Contract
with Tally? If yes raise the matter with them.

Do you have a current or nearly current data backup from before the
problem first arose? Does Tally software allow you to restore a data
back up? Do you have the original Tally software and is this failing
to install from the original CD? If this is so I suspect your only
choice is to go to Tally for help.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja said:
6-7 Days back i got Torjan in my PC and i successfully re-install
the win XP but all the software are running quite well except
TALLY7.2, At the time when i'm about to open [IT SHOWS AN ERROR
MESSAGE - ( 0xc0000005 - MEMORY ACCESS VIOLATION) ]. I had check my
RAM 512 in other 5 PC, its working absolutly fine. I dont know y
this particular (Tally7.2) software is not working. Please let me
out from this issue, due to this i had already suffer alot...Pls
anybody help.

Moreover, I had tried to install tally7.2 on other Drives also (I
mean to say on C-drive, D-Drive, E-Drive, Other Partition Drives)
but the same error received.

regards
sandeep
Click to expand...
Click to expand...
Click to expand...
 
Hi gerry

Pls check your mail for my reply...i mailed you on [ (e-mail address removed) ]
I had attached 3 Files.

regards
Sandeep

Gerry said:
Are there any yellow question marks in Device Manager? Right click on
the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not checked.

Have you looked at the Warning and Error Reports in the System and
Application logs in Event Viewer?

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Part of the Description of the error will include a link, which you
should double click for further information. You can copy using copy
and paste. Often the link will, however, say there is no further
information.
http://go.microsoft.com/fw.link/events.asp
(Please note the hyperlink above is for illustration purposes only)

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja said:
Thanks alot gerry for your reply

Tally7.2 is an Accounting Package & i'm using an original software
but still it wont work. Tally have a live support too. I had already
written the mail to them also, No reply received. I think tally
persons itself not solve the issue. i had a latest backup of my data
but the thing is that. tally close down immediately. i was not able
to do anything on it.

Once again thank you for your reply. have a good day
regards
sandeep


Gerry said:
Sandeep

I use Sage accounting software and until you mentioned Tally 7.2 I
had never heard of it. I see that Tally 7.2 is not the latest
version.

Background on your error message:
http://msdn2.microsoft.com/en-us/library/ms796183.aspx

If you are satisfied that there is no problem with your RAM memory
and this is the only problem then it is most likely a damaged or
corrupted driver associated with Tally. The Tally web site does not
offer much in the way of support. Do you have a Maintenance Contract
with Tally? If yes raise the matter with them.

Do you have a current or nearly current data backup from before the
problem first arose? Does Tally software allow you to restore a data
back up? Do you have the original Tally software and is this failing
to install from the original CD? If this is so I suspect your only
choice is to go to Tally for help.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja wrote:
6-7 Days back i got Torjan in my PC and i successfully re-install
the win XP but all the software are running quite well except
TALLY7.2, At the time when i'm about to open [IT SHOWS AN ERROR
MESSAGE - ( 0xc0000005 - MEMORY ACCESS VIOLATION) ]. I had check my
RAM 512 in other 5 PC, its working absolutly fine. I dont know y
this particular (Tally7.2) software is not working. Please let me
out from this issue, due to this i had already suffer alot...Pls
anybody help.

Moreover, I had tried to install tally7.2 on other Drives also (I
mean to say on C-drive, D-Drive, E-Drive, Other Partition Drives)
but the same error received.

regards
sandeep
Click to expand...
Click to expand...
Click to expand...
 
sandeep,

(e-mail address removed) is not a real e-mail address. Post your results to this
newsgroup.


GS



sandeep.pupreja said:
Hi gerry

Pls check your mail for my reply...i mailed you on [ (e-mail address removed) ]
I had attached 3 Files.

regards
Sandeep

Gerry said:
Are there any yellow question marks in Device Manager? Right click on
the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not checked.

Have you looked at the Warning and Error Reports in the System and
Application logs in Event Viewer?

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Part of the Description of the error will include a link, which you
should double click for further information. You can copy using copy
and paste. Often the link will, however, say there is no further
information.
http://go.microsoft.com/fw.link/events.asp
(Please note the hyperlink above is for illustration purposes only)

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja said:
Thanks alot gerry for your reply

Tally7.2 is an Accounting Package & i'm using an original software
but still it wont work. Tally have a live support too. I had already
written the mail to them also, No reply received. I think tally
persons itself not solve the issue. i had a latest backup of my data
but the thing is that. tally close down immediately. i was not able
to do anything on it.

Once again thank you for your reply. have a good day
regards
sandeep


:

Sandeep

I use Sage accounting software and until you mentioned Tally 7.2 I
had never heard of it. I see that Tally 7.2 is not the latest
version.

Background on your error message:
http://msdn2.microsoft.com/en-us/library/ms796183.aspx

If you are satisfied that there is no problem with your RAM memory
and this is the only problem then it is most likely a damaged or
corrupted driver associated with Tally. The Tally web site does not
offer much in the way of support. Do you have a Maintenance Contract
with Tally? If yes raise the matter with them.

Do you have a current or nearly current data backup from before the
problem first arose? Does Tally software allow you to restore a data
back up? Do you have the original Tally software and is this failing
to install from the original CD? If this is so I suspect your only
choice is to go to Tally for help.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

sandeep.pupreja wrote:
6-7 Days back i got Torjan in my PC and i successfully re-install
the win XP but all the software are running quite well except
TALLY7.2, At the time when i'm about to open [IT SHOWS AN ERROR
MESSAGE - ( 0xc0000005 - MEMORY ACCESS VIOLATION) ]. I had check my
RAM 512 in other 5 PC, its working absolutly fine. I dont know y
this particular (Tally7.2) software is not working. Please let me
out from this issue, due to this i had already suffer alot...Pls
anybody help.

Moreover, I had tried to install tally7.2 on other Drives also (I
mean to say on C-drive, D-Drive, E-Drive, Other Partition Drives)
but the same error received.

regards
sandeep
Click to expand...
Click to expand...
Click to expand...
 
Back
Top